Richard Oros the creator of the LOAD SHED A/C™ June 2009
Generator Load Shedding:
The Load Shed A/C™ allows two or more large air conditioners to operate on a generator sized for only one air conditioner. When the utility fails and the transfer switch flips down to generator power, the Load Shed A/C will shut off one air conditioner while allowing the other to operate until the adjustable timer expires. The Load Shed A/C will then allow the second air conditioner to operate on the adjustable timer. When the second timer expires, the process will start over again with the first air conditioner. Save $thousands$ with the Load Shed A/C by reducing the size generator needed to power your air conditioning during an outage. |
Provided Functions:
Automatic load reduction to match the generator supply. Each Load Shed A/C allows for 2 of any size air conditioners to alternate operation with adjustable timers while on a generator automatically. While on utility, both air conditioners operate normally. As many as 9 Load Shed A/C’s may be connected to each generator system, controlling up to 18 air conditioners at once! Installation Information: Richard Oros' Load Shed A/C requires 1 Installation Kit, 1 conduit and 2 low voltage thermostat wires.
| |
The LOAD SHED A/C PLUS™ has all the same adjustable components as the Load Shed A/C, plus will turn off circuits as large as 100 Amps automatically while on an automatic generator system.
Each Load Shed A/C Plus rotates 2 air conditioners on 2 adjustable timers and turns off any size load up to 100 Amps/600V automatically while on an automatic generator. Use up to 9 Load Shed A/C Plus on one generator system. |
The Load Shed A/C Smart Delay™ staggers when air conditioning turns on. Whether there are 2 or 8 air conditioners, the Load Shed A/C Smart Delay will stagger each air conditioner five seconds apart, thus lowering the surge of the generator's surge capabilities.
More about Richard Oros or website
More about Richard Oros or website